Saturday, April 12, 2008
latest oil and gas jobs in malaysia and brunei
Labels: Oil and Gas 0 commentsFor Miri:
1. QA/QC Engineer
2. Crane Technicians
3. Crane Assessor
For KL company
· Instrumentation Engineer at the Head Office and Design/Construction Site)
·
· • Specification, installation, and commissioning of the Production Data Management System (PDMS) requirements.
· • Responsible for input into the project including design review, preparation of commissioning procedures, and maintenance and operations manuals.
· • At the Construction Yard(s) responsible for coordination and input on all Instrumentation queries.
· • Advises on routine maintenance periods for all instrumentation on site according to relevant legislation.
· • Conduct training for offshore operational personnel where required.
·
· PRINCIPAL ACCOUNTABILITIES
·
· • Ensure effective operation of the Production Data Management System (PDMS). Ensure all meansurement and metering data, both daily and high frequency, is properly captured, analyzed, and stored.
· • Liaison with field personnel with respect to facilities optimization and integrity assurance.
· • Lead offshore commissioning activities by ensuring installations and/or changes to instrumentation are completed to relevant codes and practices.
· • Makes recommendations to management to improve all areas instrumentation engineering. Prepare instrument specification sheets.
· • Ensures field maintenance and production operations are given engineering direction and support. Assists in troubleshooting production operations problems.
· • Tracks and compares Field performance with other facilities
· • Prepare procedures and technical support. Review and revision of P&ID diagrams.
· • Monitor instrumentation performance and recommend appropriate improvements where necessary.
· • Assist in preparation of the annual budget and monitoring budget performance throughout the year.
· • Support the Management of Change procedures where applicable.
· • Assist in planning and coordinating all activities related to instrumentation engineering.
·
· KEY AUTHORITIES
·
· • Signs off on instrumentation recommendations.
· • Supervise all technical work, both in house and by outside contractors, related to Instrumentation Engineering.
· • Assist in coordination of budget activities
·
· WORKING RELATIONSHIP
·
· • Reports directly to the Onshore Support Manager, keeping him informed of all technical activities
· • Liaise with all other disciplines to ensure proper document archiving
· • Works with the Offshore Team to ensure proper facilities management
· • Coordinates directly with any engineering contractors on studies or facility modification work related to instrumentation engineering.
·
· QUALIFICATIONS AND EXPERIENCE
·
· Required:
· • University degree in Engineering, preferably Electrical and Electronics, or Instrumentation Engineering.
· • Minimum 10 years experience in oil and gas with 5 years in offshore operations.
· • Experience in design and construction engineering of offshore processing facilities.
· • Production / Operations experience (oil industry).
· • Fully trained in the on-site architectural system of the Data Control System, Safety Systems, and knowledge of specialist vendor software packages.
· • Some qualification in Micro-Computer Technology.
· • Willingness to travel to the field, both onshore and offshore.
· • Fluency in English, both spoken and written, is essential.
· • Strong communication skills.
·
· Desirable:
· • Specific knowledge of Production Data Management Systems (PDMS), Computer Aided Materials Management Systems (CMMS).
· • Strong personal and interpersonal skills with flexibility to meet the fluctuating needs of operations support.
· • Oil and Gas Systems design, construction, instrumentation, operations, and maintenance experience in offshore hydrocarbon production and gas transmission systems.
· • Experience or knowledge of Project, Construction, and Commissioning activities.
·
·
· Senior Deepwater Production Technologist
·
· Key Responsibilities:
·
· • Responsible for routine well and reservoir surveillance, problem well diagnostics, and repair.
· • Ensuring Production Data Management System (PDMS) is fully functional, both for daily reporting and Engineering analysis software.
· • Responsible for well and field production performance, production allocation and database management, decline analysis, investigate & control coning, maintain choke model, and performing Integrated Asset Modeling (IAM) linking Material Balance, Nodal Analysis, and Surface Network softwares (Prosper-GAP-Mbal).
· • Ensure adequate well start-up and shut-down procedures are prepared and followed for the XXX Deepwater development, for both Subsea and Dry Tree Unit wells. This includes oil, gas, and water production and injection wells.
· • Leadership, direction, and development of offshore Production Operator Staff.
· • Close liaison with Facilities and Reservoir Engineers. Liaise with Well Services Intervention Supervisor for well servicing operations and maintenance of platform infrastructure. This work will include multiphase well testing and sampling programs for well and reservoir performance review. Work with cross-functional team to define and update the field completion strategy.
· • Shared responsibility for the health, safety and welfare of all persons at any Production Site, including staff, contractors and visitors and for local environmental safety.
· • Assist in the development and implementation of flow assurance techniques and program.
·
· Requirements:
·
· • University honours degree or equivalent in Engineering, preferably in Petroleum engineering.
· • Minimum 10 years relevant industry experience in oil and gas with 5 years associated with offshore operations.
· • Familiar with issues relating to drilling, production and workover of offshore dry-tree and Subsea wells.
· • Familiarity with reservoir, completions, and construction engineering.
· • Recent experience with production optimization using computer softwares such as: Mbal©, Prosper©, GAP©, Hysys©, Production Allocation, and Decline Curve Analysis. A benefit would be some exposure to other discipline softwares such as Petrel©, Eclipse©, Hysys©, 3D facilities modeling, Computerized Maintenance Management Systems.
· • Fluency in English, both spoken and written, is essential.
· • Strong personal and interpersonal skills with flexibility to meet the fluctuating needs of cross-functional operations support.
· • Deepwater experience or a willingness to learn new aspects related to the challenges of Production Operations in a deepwater environment.
· • Willingness to travel to the field, both onshore and offshore.
·
·
·
·
· FACILITIES ENGINEER
·
· RESPONSIBILITIES
·
· • Provide mechanical, facilities and corrosion engineering support for new project start-up and subsequent production operations.
·
· • Responsible for topsides maintenance and corrosion engineering activities for facilities.
·
· • Ensure regular inspections and surveys are conducted to ensure that corrosion levels are not impacting on the original design basis for equipment. This will involve regular visits to the offshore production facilities site
·
· • Input in to the Computerized Maintenance Management System (CMMS).
·
· • Trouble shooting of operational problems and quantitative risk assessments.
·
· • Evaluate survey results from pigging, pipe-in-pipe surveys, pipeline leak detection surveys and remotely operated vehicle (ROV) inspection.
·
· • Set up corrosion data management system for all plant equipment/facilities. Monitor and provide input to inventory levels for spare parts (mechanical).
·
· • Cost estimating for small construction and/or maintenance projects, including design and supervision.
·
· • Technical input to Tenders, Contracts and Purchase Orders. Carry out prequalification of corrosion contractors/consultants.
·
· • Work closely with Operations Support staff: Maintenance engineers, Compliance engineers, Offshore Production Superintendents. Significant interface with office based disciplines: Subsurface, Subsea, Health Safety & Environment, Drilling and Completions, Document Control, Gas Processing, etc.
·
·
· QUALIFICATIONS AND EXPERIENCE
·
· • Bachelor of Science in related discipline (Metallurgical/Mechanical/Chemical).
·
· • Knowledge of offshore flow process facilities, design installation and operation. Strong technical background in Facilities and Corrosion Engineering, with strong knowledge in process related safety issues.
·
· • A broad understanding of equipment inspection (including marine, process, pipeline and onshore) requirements and the use of this data in corrosion monitoring.
·
· • At least 15 years of experience in facilities, production, and/or corrosion engineering related to offshore oil and gas production operations.
·
· • Good knowledge of international standards and codes related to corrosion.
·
· • A reasonable understanding of the various engineering disciplines that interface with Production Operations: Subsea, drilling and Completions, Construction, Pipeline & Risers and Subsurface Operations.
·
· • Self-motivated and required to have strong teamwork skills and communications skill. Fluent in English. Computer and software literate.
·
·
· • Familiar with Risk Based Inspection (RBI) and Asset Integrity Monitoring (AIM) programs, 3D facilities design software and Computerized Maintenance Management Systems.(CMMS).
·
· • Familiar with DOSH regulations.
·
· • Deepwater experience or a willingness to learn new aspects related to the challenges of Production Operations in a deepwater environment.
·
· • Willing to travel to the field, both onshore and offshore.
·
· 1. Turnkey Design – 3Pax
· 2. Structural Engineering -3pax
· 3. Project Management – 3pax
For Klang Office:
JOB : LOGISTICS ASSISTANT
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Review production requirements and resolve warehouse/material problems to ensure cost effective operation and prevent delays
§ To ensure the efficient running of the warehouse operations.
§ Manage inventory levels and ensure that sufficient materials are available when required
§ Ensure warehouse is efficiently and effectively operated with optimum manning levels
§ Ensure that the processes are streamlined and best practice is followed
§ Monitor stock levels, movements and trends
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Academic qualifications High School
§ A minimum of 5 years experience in a relevant role involving property related services. Good administration and organisational skills are essential
§ To have the ability to administer, organise and control systems
§ To have good planning skills to ensure compliance with tight deadlines.
JOB : LOGISTICS COORDINATOR
§ Responsible for managing processes involved in a supply chain and liaises with a variety of parties, including suppliers of raw materials, manufacturers, retailers and, increasingly, consumers.
§ Logistics managers co-ordinate processes to ensure customer satisfaction. An awareness of and strategic response to external influences, such as legislation, is vital.
§ The role of distribution manager within logistics may involve transportation, stock control, warehousing, and ensuring structures are in place to monitor the flow of goods and materials.
§ IT plays a key part within the logistics field in forecasting increasingly complex systems of stock levels, delivery times, transport costs and performance evaluation
§ Monitoring the quality, cost and efficiency of the movement and storage of goods;
§ Co-ordinating and controlling the order cycle and associated information systems
§ Analysing data to monitor performance and plan improvements;
§ Allocating and managing staff resources according to changing needs
§ Liaising and negotiating with customers and suppliers;
§ Developing business by gaining new contracts, analysing logistical problems and producing new solutions.
QUALIFICATION, EXPERIENCE AND ABILITIES
§ A University degree preferred in an engineering or commercial discipline.
§ At least 10 years experience in the Procurement function, preferably in the Oilfield Industry.
§ A motivated self-starter with ability to work on own initiative
§ Strong negotiation skills and financially aware.
§ Good communicator and a team player
JOB : WAREHOUSE ASSISTANT
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Control of client inventory
§ Ensuring accurate stock checks are carried out and systems updated with correct information.
§ Control of all packing and shipping of equipment for despatch and demobilisation.
§ To comply with HM Customs and Excise legislation.
§ Maintain a tidy warehouse, including the yard, or other areas, under warehouse control
§ As necessary, perform other tasks requiring essentially the same level of skill and responsibilities.
§ Ensuring the activities are carried out with due regard to HSE regulations/legislation and in accordance with the company procedures
§ Maintaining accurate stock records and compiling kits to meet manufacturing requirements
§ Dealing with vendor deliveries
§ Dealing with internal queries
§ Dealing with client owned equipment in for storage/repair in stores control.
§ Packing and shipping of equipment to meet deadlines and to meet all current relevant legislation.
QUALIFICATION, EXPERIENCE AND ABILITIES
§ 2 years experience working within a stores environment
§ Forklift operators certificate
§ Overhead Crane/Slinger Banksman Certificate
§ Driving Licence
§ Computer Literate
JOB : WAREHOUSE SUPERVISOR (2)
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To act as Stores Team Leaders deputy in his absence and adopt all the duties therein.
§ To ensure and maintain a safe working environment for all the SST and any visitors.
§ To ensure that all SST personnel are adequately trained in all aspects of their duties.
§ To ensure that all requests and queries are dealt with in the most expedient manner.
§ To ensure that there is no deviation from procedures unless authorised by a higher authority.
§ Coordination and prioritisation of manpower to specific areas as dictated by workload.
§ To comply with HM Customs and Excise legislation.
§ Ensure that the Porta Kabin and Service portion of the Yard and any blister buildings are maintained in a tidy and organised manner.
§ Ensure that all activities are carried out with due regard to HSE regulations / legislation and in accordance with the companies procedures and policies.
§ Perform any other tasks as dictated by the Warehouse Manager employing consistently high levels of professionalism.
§ Maintaining accurate stock records and carrying out any reconciliation as required on all Client Owned equipment.
§ Overseeing and participation in Kitting/Shipping compilation, ensuring accuracy and expediency are adhered to so as to meet customer's requirements.
§ Stay abreast of SAP procedures, ensuring that the knowledge base is relevant for the progression of queries, cross referencing and data retrieval.
§ Ensure that all staff are fully conversant in the following duties:
§ Dealing with vendor deliveries, receipting goods on to SAP.
§ Dealing with internal queries, i.e. confirmation of receipts, locations and closing off of cleared vouchers enabling Finance to make payment.
§ Dealing with client owned equipment in for storage/repair, ensuring taking goods 'Off Hire' within the stipulated time frame.
§ Packing and Shipping of equipment to meet deadlines, ensuring that all documentation complies with current legislation.
QUALIFICATION, EXPERIENCE AND ABILITIES
§ 2 years experience working within a stores environment (preferred).
§ Forklift operator's certificate.
§ Overhead crane/Slinger Banksman certificate.
§ Driving Licence.
§ A high level of computer literacy, including Microsoft outlook.
§ Spills training (preferred)
§ Waste transfer note training (preferred)
JOB : BUYER (9)
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To effectively and efficiently purchase materials and services ensuring company procedures are adhered to and proper records maintained.
§ Expediting.
§ Project Management: - responsible for all aspects of procurement related activities against allocated projects. Eg. Project reporting of spend / savings, deliveries to schedule etc.
§ Cost Savings for Projects in line with agreed levels.
§ Liaise with projects and ensure reports are produced in a timely manner.
§ Negotiate Supplier Agreements.
§ Validate bid pricing and where appropriate negotiate key segments of major bids.
§ Response NCR's on vendor or related issue within agreed timescale.
§ Responsible for recommending min/max stock levels.
§ Ensure monthly reports are submitted in a timely manner.
§ Ensure cost saving spreadsheets are submitted for each Project.
§ Ensure Expediting Reports are submitted in a timely manner and information is accurate.
§ Maintain knowledge of current supply market
§ Monitor cost of quality.
§ Ensure all work is carried out in accordance with Aker Kvaerner HSE regulations.
§ Ensure all work is executed to the highest ethical standards in line with Aker Kvaerner recommendations and policy on business ethics.
§ As required, perform other SC related tasks which require similar levels of skill and responsibility.
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Recognized SC or Purchasing Qualification.
§ Business or Engineering Degree Preferred.
§ Good IT skills; SAP Experience preferred
§ Good Communication Skills.
§ Good negotiation skills
§ Drive and Enthusiasm.
JOB : MATERIALS PLANNER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Work Order/ Requisition Control - Release purchase requisitions to Purchasing department as required by production plan and release work orders to Manufacturing as required or when components are available
§ Pre-buying - Control the requisitions / placement of orders for long lead items bought at the beginning of a project before the Bill of Material is created / loaded onto the system.
§ Planning - Use the various computer systems to see if it makes sense to combine future requirements, re-schedule purchase or manufacturing orders etc. Constantly review planning parameters (minimum order quantities, lead times etc) for items under your control
§ Expediting - Follow up with relevant departments to ensure Engineering Release on-time, PO is placed on time and that parts arrive / are made on time.
§ Change Control – Review and action on requirements of Engineering changes in respect of the Production Plan. Ensure ECN's are actioned in a timely manner
§ Shipping - In co-ordination with Purchasing and Manufacturing to organise shipments of goods with the shipping agents to the manufacturing and assembly and test sites
§ Material Requirement Planning – Update and run MRP processes the ER system(SAP/Multi +)
§ Cost reduction – Identify opportunities to reduce cost
§ Substitution - Use up excess inventory through approved material substitution when possible
§ Policy/Procedures - Work to the Company Purchasing and QA strategies, policies and procedures
§ Audit - Participate in internal audits as required
§ Reporting - Issue material status reports by product, project and by exceptions
§ HSE - Ensure that all work is carried out in accordance with KOP's Health & Safety regulations
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Ability to negotiate and communicate at all levels
§ Conversant with engineering, procurement and manufacturing systems, practices and processes
§ Preferably with experience of Subsea /Offshore type components and products
§ Understanding of MRP systems and basic understanding of engineering principles
§ Ability to work under pressure and on own initiative
§ Competent with Microsoft applications (Word, Excel, Powerpoint, Outlook, etc)
§ Ability to pre-empt situations and react positively
§ Organised and methodical
§ Analytical with material planning skills
JOB : EXPEDITOR (4)
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Responsible for monitoring and follow up with suppliers and subcontractor to ensure items are delivered to AKM as per dates in purchase order.
§ Responsible for coordinating the shipment form suppliers with logistic and warehouse warehouse.
§ Responsible for coordinating the shipment to and from subcontractors with logistic and warehouse warehouse
§ Update expediting history notes in SAP and refor rescheduling on purchase order.
§ Update the delivery date in hot list and issues to warehouse.
§ Issue purchase order status reports by project and by exceptions on weekly basis.
§ Prepare delinquency reports on weekly basis.
§ Carryout duties using various computer software packages; SAP preferred
§ Liaise with all relevant departments to establish all product, project and manufacturing requirements
§ Prepare for and be involved in Aker Kvaerner Subsea
§ Ensure that all work is carried out in accordance with AKER KVAERNER SUBSEA
§ Actively participate in AKER KVAERNER SUBSEA
§ Be prepared to perform other duties which require essentially the same level of skill and responsibility
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Higger Diploma or Degree.
§ 2 years experience as buyer, buyer planner or material planner and involved in expediting.
§ Knowledge in SAP preferred.
§ Understanding of MRP systems and basic understanding of engineering principles.
§ Ability to work under pressure and on own initiative
§ Competent with Microsoft applications (Word, Excel, PowerPoint
§ Good communicator and team player
§ Conversant with engineering and manufacturing systems, practices and processes.
§ Ability to pre-empt situations and react positively
§ Organised and methodical
JOB : QS ENGINEER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ In general, and in support of the other supply chain personnel, provide a local focal point for all supplier quality and technical matters and to act in the supervision of any Contract QS engineers as may be assigned to the role from time to time.
§ Liase with Supplier, Customer and Third Party QS representatives in pursuance of and compliance with contractual obligations.
§ Conduct witness and hold tests on selected suppliers
§ Document and manage witness and hold program for selected suppliers
§ Conduct and report on vendor audits in accordance within an approved audit schedule
§ Conduct ad hoc audits or investigations into particular supplier quality problems so that root causes are identified and effective corrective and preventive measures are put in place within the NCR and CAPA Management Systems
§ Document and manage to root cause vendor NCR for selected suppliers
§ Evaluation and approval of potential suppliers prior to their addition to the Approved Vendor List (AVL) in order to maintain a supply base capable of supporting Aker Kvaerner Subsea
§ Conduct audits of suppliers as required and/or to investigate particular quality problems to achieve the above requirement.
§ Provide guidance and general support and awareness training to all supply chain managers and supervisors (and others) in the operation, maintenance and continual improvement of the company's NCR and supplier CAPA systems.
§ Assist in the maintenance and revision as required, of Aker Kvaerner Subsea
§ Provision and development of periodic reports on vendor performance indicators and trends.
§ Provision of direction, guidance, support and development of a Quality culture within supplier base.
§ As necessary, perform other duties, which require essentially the same level of skill and responsibility.
§ Day to day management of technical and engineering issues within Aker Kvaerner Subsea
§ Conduct Vendor quality audits on Aker Kvaerner Subsea
§ Develop and nuture relationships within Aker Kvaerner Subsea
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Academic qualifications:
§ Engineering degree holder with at least 2 years of experience in QA/QC function and supplier development.
§ Engineering Diploma holder with at least 5 years of working experience in QA/QC function and supplier development.
§ SPM and/or Technical Certificate school/institute with at least 7 years of working experience in QA/QC function and supplier development.
§ Vocational qualifications:
- Preferably a Lead Assessors Course with examination pass (recognised by IRCA)
- A recognised Quality Assurance or Quality
- Formal training the new ISO 9001:2000 Standard and audit training to the new Standard would be distinctly advantageous.
§ Note:
Candidates/job-holders without the relevant formal qualifications above but possessing other academic or vocational qualifications or who can demonstrate a greater level of relevant practical experience with a proven track-record may be considered equally competent. Additionally, candidates/job holders with higher academic qualifications may be considered equally competent.
§ Added Experience:
§ Minimum 2-5 years in closely related industry (electrical/ hydraulic/mechanical design, oil and gas, manufacturing/machining/coating and service) in a technical role(s) with at least 2 of these years being in a Vendor Quality Assurance responsible function with similar responsibilities as described herein.
§ Business competency requirements:
- Commercially aware.
- Customer focused.
- Very well developed inter-personal skills.
- Good time-management and organisational skills
- Systematic approach to work activities.
- A strong team player.
- Self-motivated and capable of working on own initiative.
- Innovative and receptive to change.
- Demonstrates an above average level of general competency in the use of Microsoft Word, Excel and PowerPoint applications.
JOB : PROJECT MANAGER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Has the overall authority and responsibility for the execution of this Project in full compliance with CLIENT Specifications, Contractual Terms and Conditions, within the required schedule and within the budget. He is the principal contact for CLIENT on matters relating to the contract.
§ Leading the Project Management Team (PMT) for the execution of the project's scope of work.
§ Client focal point.
§ Responsible for resolving all issues on both commercial, technical and other problems which may arise during the project execution.
§ Review and approve where applicable all documentation critical to the execution of the project.
§ Implementation of Project Quality Assurance Plan/PEM/SAP as required
§ Meetings with Management or customers on an as needed basis to verify status of orders
§ Organise own workload allocation to meet agreed project timescales
§ Participate in Production Planning reviews on projects to establish best delivery solutions
§ Train personnel to develop Productivity & Safety awareness
§ Ensure Project documentation is correctly documented and stored.
§ Prepare procedures for the products that are Fabricated in the Fabrication Shop.
§ Carry out estimation work for Tenders etc.
§ Carry out any other work as required by his Superior
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Qualified to Degree or equivalent in Mechanical or Structural or Production Technology.
§ At least ten years relevant experience in a Fabrication background.
§ Have a working knowledge of oil industry working techniques and ideally will have had exposure to numerous Fabrication processes.
§ Be a good communicator and have good presentational skills.
§ Must have a proven involvement with multi-disciplined Projects, and be familiar with equipment and activities which are both upstream and downstream for his job function.
JOB : PRODUCT ENGINEER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To work in a safe manner at all times, to comply with all current safety legislation and Aker Kvaerner Subsea
§ To work to ISO and API.
§ To work to project specific quality plans.
§ To work at all times to the Company's Integrated Management System.
§ To complete all activities identified within the department work packs.
§ Plan, coordinate to ensure that fabrication activities of the risers are in accordance with established plans and procedures
§ Ensure that fabrication equipment and appurtenances are maintained and are in safe working condition.
QUALIFICATION, EXPERIENCE AND ABILITIES
· Degree of Diploma in Electrical / Mechanical Engineering
· Flexible attitude to type and patterns of work and a willingness to learn new skills.
· Sound knowledge of the English language both written and spoken
· Familiarity with welding codes applicable to pressure components (e.g. ASME, etc.) preferred
· Should be a team player.
· Flexible attitude towards work and an eagerness to learn new skills.
· Competent on normal PC applications.
· Ability to meet the challenges in the industry.
· Practical knowledge of welding and materials and with prior experience in Welding Inspection (in the Oil & Gas industries).
JOB : ELECTRICAL / MECHANICAL TECHNICIAN
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To work in a safe manner at all times, to comply with all current safety legislation and Aker Kvaerner Subsea
§ To work to ISO and API.
§ To work to project specific quality plans.
§ To work at all times to the Company's Integrated Management System.
§ To complete all activities identified within the department work packs.
§ To ensure that all activities are made to established procedures / plans
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
· Diploma or professional certificate in Electrical / Mechanical engineering
· Flexible attitude to type and patterns of work and a willingness to learn new skills.
· Should be a team player.
· At least 5 years in pipe fitting, fabrication and assembly
· Flexible attitude towards work and an eagerness to learn new skills.
· Ability to meet the challenges in the industry.
· Practical skill for fabrication, and A&T (in the Oil & Gas industries).
JOB : PROJECT PLANNER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To work in a safe manner at all times, to comply with all current safety legislation and Aker Kvaerner Subsea
§ To work to ISO 9001.
§ To work to project specific quality plans.
§ To work at all times to the Company's Integrated Quality Management System (QMS).
§ Lead the Manufacturing Controllers and ensure that members are gainfully employed.
§ Ensure that Manufacturing Controllers activities meet manufacturing schedules.
§ Where necessary identify and report material availibility issues that impact manufacturing schedules/MRP dates.
§ To ensure the Manufacturing schedules and MRP dates are maintained and priorities are communicated to Manufacturing Team Leaders in a timely manner.
§ To issue Manufacturing reports as required.
§ To monitor and control team performance measures.
§ Liaise with relevant departments and advise material and documentation issues that imapct manufacturing schedules.
§ Deputise for Manufacturing Controller Team Leader.
§ Assist with recruitment, development and appraisal of team members.
§ Where necessary co-ordinate/plan and carry out team briefs.
§ Monthly reports to be issued within 5 working days of start of new month.
§ Service jobs to be added to to Manufacturing Plans within 3 days from receipt of information required on work order.
§ Missing data report on Branch Plant 101 to be reviewed weekly.
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Minimum NVQ 2 in a relevant discipline
§ Minimum of 5 years experience within a planning or materials control role preferred
§ Familiar with computer planning software– P3E, Project or other preferred
§ PC literate in the use of word processors, spreadsheets and databases.
JOB : WELDER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To work in a safe manner at all times, to comply with all current safety legislation and Aker Kvaerner Subsea
§ To work to the required weld procedures required by the respective projects.
§ To work to project specific quality plans.
§ To work at all times to the Company's Integrated Management System.
§ To complete all activities identified within the department workpacks.
§ To ensure that all activities are made to established procedures / plans
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Flexible attitude to type and patterns of work and a willingness to learn new skills.
§ Should be a team player.
§ Flexible attitude towards work and an eagerness to learn new skills.
§ Ability to meet the challenges in the industry.
§ Practical skill for manual TIG welding (in the Oil & Gas industries).
JOB : PROJECT ENGINEER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Responsibilities are carried out within a matrix structure environment whereby normal line management reporting is to the Engineering Support Manager but project reporting is to the Project Manager. There is only min supervision by the Engineering Support Manager but all engineering resources are allocated to the project after consultation with the Engineering Support Manager. The predominant responsibility is to the Project Manager. Duties on projects included:-
- Carrying out system tasks within agreed time scales and budgets and reporting system status and deviations to the Project Manager
- Organisation & day to day management of the project engineering issues.
- Client liaison – technical only all commercial aspects are dealt with by the PM
- Commercial & contractual awareness to identify variations to order
- Define technical responsibilities within the project - interfaces, system, work packages
- Technical risk assessment Bid Vs Customer specification evaluation – assess impact on Project programme and deliverables
- Monitor Project progress and deliverables through regular review meetings
- Monitor timeliness of system reviews throughout the project
- In addition to the duties listed, the jobholder is required to perform other duties assigned by the engineering support manager from time to time
- Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
- Degree with at least 5 years experience in industry or HND with at least 10 years experience in industry in a relevant discipline
- Preferably Chartered Engineering Status
- Able to monitor and manage Product Group Engineering efforts
- Able to monitor and manage master document list
- Able to act as Interface Engineer as required
- Able to manage own budgets (hours) for given project
- Working knowledge of MS Word and excel
- Working knowledge of MS Windows
JOB : MECHANICAL ENGINEER
Responsibilities are carried out within a matrix structure environment whereby normal line management reporting is to the Team Leader, but product work reporting is to the Product Group Manager via the Senior Engineer. There is a level of supervision of the engineer by more senior engineers. The predominant responsibility is to the relevant Engineering Team Leader.
· Mechanical/hydraulic engineering duties on projects, including specification, design release for purchasing, build and test supervision, drawing supervision, documentation and reporting progress to Senior Engineer. Approval of drawings up to a point of final approval by Senior Engineer.
· Familiarity and compliance with company procedures, project specifications and statutory regulations so that a standard approach design is adopted whilst satisfying customer requirements.
· Carrying out hardware tasks within agreed timescales and budgets and reporting status and deviations to Senior Engineer.
· Mechanical/hydraulic duties on bids, including technical write-up, material and manpower estimates.
· Support manufacturing on engineering issues.
In addition to the duties listed, the job holder is required to perform other duties assigned by the supervisor/manager from time to time
Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
· Degree or HND in a relevant discipline. At least 2 year's experience in industry.
· Working knowledge of Microsoft Office, Autocad and preferably 3D design tools.
· Working knowledge of Windows.
JOB : QC INSPECTOR
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ To work in a safe manner at all times, to comply with all current safety legislation and safety policy.
§ To work to ISO 9001.
§ To work to project specific quality plans.
§ To work at all times to the Company's Integrated Management System.
§ Fostering the management's desire for commitment to quality.
§ Witness / Monitor of testing and assembly ensuring that products are within design criteria limits.
§ Final inspection to G/A drawing and documentation / certification review ensuring product conforms to requirements.
§ Goods-Inward Inspection to drawing and / or data sheet including certification completeness to purchase order, co-ordination of site received testing; ensuring in-coming goods conform to requirements.
§ Ongoing identification of areas to improve quality working towards continuous quality improvement.
§ Reporting all defects through the defect reporting systems, in order to ensure close out action of all issues.
§ Ensuring that all work identified in the work packs is completed.
§ Ensure all calibrated equipment used within the build and test process is within calibration dates.
§ Ensure workshop is maintained in a safe and tidy manner.
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Diploma or equivalent in Quality Control, with specialization in welding, materials and mechanical assembly discipline preferred.
§ Completed a recognised apprenticeship.
§ At least 5 years experience in a quality role.
§ Should be a team player.
§ Flexible attitude towards work and an eagerness to learn new skills.
§ Competent on normal PC applications.
§ Ability to meet the challenges in the industry.
§ Practical knowledge of hydraulic (1000 bar operating pressure) systems.
§ Sound written skills.
§ Flexible attitude to type and patterns of work and a willingness to learn new skills
§ Familiarity with engineering drawings, G.A drawings..
JOB : SOLID WORKS ENGINEER
| ESSENTIAL DUTIES AND RESPONSIBILITIES Reporting to the Drawing Office Supervisor the Solid Work Designer is responsible for generating design layout drawings, models, detail drawings and assembly drawings. He/she will ensure that all the required technical specifications and reference material are available; the correct use of part numbers and shall supervise and check drawings. He/she will comply with all product engineering draughting standards and procedures within the department. The Designer will be required to support any other personnel within Engineering as and when required. Complied to HSE requirements |
| QUALIFICATION, EXPERIENCE AND ABILITIES · The jobholder will be ideally qualified to ONC level or equivalent in Mechanical Engineering and has detail knowledge of AutoCAD and Solidworks draughting packages. · He/she will ideally have two years relevant experience in a mechanical engineering background. · He/she will ideally have knowledge of Offshore working techniques. · He/she will have a very good and detailed knowledge of ISO Standards 128, 129 and 1101. He/she will ideally have some involvement with multi-disciplined Projects, and be familiar with equipment and activities which are both upstream and downstream from his/her job function. |
JOB : CNC MACHINIST
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ Demonstrate full commitment to all required welding processes carried out are in compliance with quality requirement.
§ Demonstrate full commitment to achieve companies productivity, efficiency and utilization bench mark are met all times.
§ To ensure welding machine tidiness and preventive maintenance schedule requirements are fulfilled.
§ To ensure the toolings used to perform day to day operations are in good conditions and report tool breakages to immediate supervisor.
§ Actively participate in Safety at all times.
§ Practice 5S concepts in machine shop at all times.
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
§ Engineering background in welding technologies, both in manual and automated operations.
§ Minimum 3 years relevant experience.
§ Knowledge on operating cladding machine.
§ Ability to understand welding processes.
§ Knowledge in preheat welding.
JOB : QUALITY ENGINEER
ESSENTIAL DUTIES AND RESPONSIBILITIES
§ In general, and in support of the other QA Personnel, provide a local focal point for all delegated QA matters and to act in the supervision of any Contract QA engineers as may be assigned to the role from time to time.
§ Prepare and issue for use, Project Quality Plans, Inspection & Test Plans and Certification Plans in order to ensure functional departments, especially engineering, procurement and production, are aware of contractual Quality requirements.
§ Liase with Customer and Third Party QA representatives in pursuance of and compliance with contractual obligations.
§ Conduct and report on internal audits in accordance with an approved audit schedule and issue NCR's (if any) resulting from these.
§ Coordinate the improvement actions for non conformance of products and processes
§ Conduct ad hoc audits or investigations into particular quality problems so that root causes are identified and effective corrective and preventive measures are put in place within the Management System
§ Evaluation and approval of potential suppliers prior to their addition to the Approved Vendor List (AVL) in order to maintain a supply base capable of supporting AKM's quality objectives.
§ Conduct audits of suppliers as required and/or to investigate particular quality problems to achieve the above requirement.
§ Provide guidance and general support and awareness training to all managers and supervisors (and others) in the operation, maintenance and continual improvement of the company's Operating System
§ Assist in the maintenance and revision as required, of AKM's processes and procedures relating to Quality Assurance core capabilities.
§ Assist with provision of periodic reports on the OS performance indicators and trends.
§ Provision of direction, guidance, support and development of a Quality culture in other departments.
§ As necessary, perform other duties, which require essentially the same level of skill and responsibility.
§ Complied to HSE requirements
QUALIFICATION, EXPERIENCE AND ABILITIES
Academic qualifications:
- A university degree in Engineering or equivalent /technical qualifications
Vocational qualifications:
- Trained in ISO9001 audits
- Formal training on the new ISO 9001:2000 Standard and audit training to the new Standard would be distinctly advantageous.
Note:
§ Candidates/job-holders without the relevant formal qualifications above but possessing other academic or vocational qualifications or who can demonstrate a greater level of relevant practical experience with a proven track-record may be considered equally competent.
§ Additionally, candidates/job holders with higher academic qualifications may be considered equally competent.
Experience:
- Minimum 2-5 years in closely related industry (electrical/ hydraulic/mechanical design, manufacturing and service) in a technical role(s) with at least 2 of these years being in a Quality Assurance responsible function with similar responsibilities as described herein.
Business competency requirements:
- Commercially aware.
- Customer focused.
- Very well developed inter-personal skills.
- Good time-management and organisational skills
- Systematic approach to work activities.
- A strong team player.
- Self-motivated and capable of working on own initiative.
- Innovative and receptive to change.
- Demonstrates an above average level of general competency in the use of Microsoft Word, Excel and PowerPoint applications.
Knowledge in SAP applications is a distinct advantage
Bryant
Manager
Projects and Planning
CHIS International Technical Resource Sdn Bhd
12A-3-7, Jln Seri Jati 1, Off Jln Puchong,
Taman Sri Jati, 58200,Kuala Lumpur , Malaysia
Phone: ++603 7785 5537 ext: 104 Fax: ++60 7783 5537
Mob: ++6017- 308 9537
Email: bryant@chisgroup.com
JOHOR Branch:-
16, Jln Jerau 11,
Taman Pelangi, 80400 Johor Bahru
CANADA - AUSTRALIA - INDIA - MIDDLE EAST- BRUNEI- SINGAPORE
***************************************************
One Of Gods Greatest Gifts Are Those Unanswered Prayers
Manager
Projects and Planning
CHIS International Technical Resource Sdn Bhd
12A-3-7, Jln Seri Jati 1, Off Jln Puchong,
Taman Sri Jati, 58200,
Phone: ++603 7785 5537 ext: 104 Fax: ++60 7783 5537
Mob: ++6017- 308 9537
Email: bryant@chisgroup.com
JOHOR Branch:-
16, Jln Jerau 11,
Taman Pelangi, 80400 Johor Bahru
CANADA - AUSTRALIA - INDIA - MIDDLE EAST- BRUNEI- SINGAPORE
***************************************************
One Of Gods Greatest Gifts Are Those Unanswered Prayers
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
0 comments: to “ latest oil and gas jobs in malaysia and brunei ”
Post a Comment